Hi there! My name is Arthur Dumont, and I’m a dishwasher repair technician with 5-year experience.
Here you can ask me about dishwashers repair.
I want to warn you: the site is not the main source of my income, so the delay in answering your question might be a couple of days. I will send the answer to your mail. I also reserve the right to publish our correspondence on this page.
I want you to note! I do not have the highest powers, and I am not a psychic. I can not point the cause of your appliance breakdown at a distance. Referring to me, explain in detail the essence of the problem. I will guide on how and where you can find the cause of the fault.
Ruth – 01.10.2018
Dishwasher Bosch SRI 33 AB. There is no water in the dishwasher, the indication “check the water supply” is on. Filters cleaned, water supply is all right, but no water enters the machine. What could be the problem?
I think the problem may be a malfunctioning water supply valve. Check it first.
Archibald – 06.10.2018
Bosh dishwasher, periodically every half a year a situation occurs: the dishwasher is filled with water, washes for a while, then she drains the water without completing the wash cycle and triggered AQUASTOP.
After a long time, the machine dries out and works again, until the next such incident.
What to do?
Clean the drain filter. If it does not help, look for a leakage place under the pan.
There is no error on the display? Maybe you did not pay attention!
Mary – 08.10.2018
Hello. Dishwasher Bosch. We had a problem E15, the faucet turned on and the machine did not take water, and all the time it was pumped out. We watched quite a few rollers, by repairing it on our own, after all our efforts, we achieved that the dishwasher started working and the faucet stopped blinking. But at the end of washing the dishes, the faucet is turned on again and error E15 appears. The machine starts to buzz, pump out the water and it does not stop, but there is a white coating on the dishes. What could it be ?
Hi. Error e15 in the Bosch dishwasher – means the operation of the leakage protection system. Look for a leak in the dishwasher
Anthony Simon – 10.10.2018
We have a model of dishwasher Bosch SPV40E20EU / 17.
In the morning itself began to make a noise, as if it wants to draw water, while the door is ajar, the control panel does not give signs of life.Turned off the dishwasher from the network, turned on – the same thing, no indicator is lit. What could be the problem?
Hello You have a problem with the control board. Call a specialist. Probably will require new management board.
Christopher – 13.10.2018
At Bosch dishwasher SPV58M00EU / 11 burned out heating element, I also changed the pump assembly. After switching on, the faucet and rinser icon flashes, water is not supplied to the dishwasher, but voltage is applied to the motor. Resistance aquastop 4.2 Kom, if you give directly 220V – water begins to flow. In the new pump, the numbering of contacts is reversed (123 instead of 321). I tried to swap contacts 1.3 – nothing changes. What else can be seen or the problem in the control unit?
Hi. At the time of the water supply, check the voltage on the water supply valve. Very often, when the heating element burns, a malfunction occurs in the control board.